Skip to content
  • There are no suggestions because the search field is empty.

How to Set Up the Dr. Dish CT+ and CT Swivel Net System

Below you will find a step-by-step guide on how to utilize the Swivel Net System for away from basket training simulating game-like passes to develop your inside game (Post Entry Passes).

Video Guide


Written Instructions

  1. Position Machine: Position machine away from the basket in the location you want the passes to be delivered from. Ensure to engage the wheel locks on the front two wheels so the machine does not move.

  2. Manually Aim Machine Body: With the machine powered off manually rotate the body of the machine all the way to whichever side the passes will be sent to.

  3. Remove Shot Counter: Remove upper shot counter component from the machine and store in a safe place.

    1. Note: If the net system is not fully deployed that should be done at this point as well. A guide on this is linked here.

  4. Lift Release Knob: At the back of the machine, to the right of the large net system handle, there is a small knob that can be pulled up. This will allow the net system to swivel 180 degrees.  The net should now be positioned behind the machine instead of over it.

  5. Install Detachable Ball Ramp: This piece is commonly stored attached to the side of the net frame. It will need to  be installed so that the ball will drop from the net and upper feeder to the lower feeder area.
  6. Power on Machine:  Connect the machine to your wall outlet or portable battery system and power it on.

  7. Load and Begin Drill: Load the basketballs into the machine and begin the drill!

    • Please see this blog for exciting drills to further develop your inside game!

 

If you encounter any issues we’d love to assist you further! If you are already working with a representative please reply to them indicating the step you are getting stuck on. If you are not please start a support ticket here or you can call the Support+ Team at 612-412-4410!