Skip to content
  • There are no suggestions because the search field is empty.

Rotation Motor Fuse replacement on Dr. Dish Home, Rebel+, All-Star+, CT+, FCLTY, and CT models

Below you will find a step-by-step guide on replacing the Rotation Motor Fuse in your Dr. Dish Home, Rebel+, All-Star+, CT+, FCLTY, or CT models

Required Tools

Video Guide

 

Written Instructions

  1. Gain Access: Remove the left shroud from the Dr. Dish machine to expose the internal electronics, including the circuit board and wiring compartment.

  2. Locate the Fuse: The fuse you need to replace is located in a black plastic housing zip tied to the rotation motor.

  3. Cut Zip Ties: Use your wire cutters to carefully cut the zip ties securing the wiring and fuse housing to the rotation motor. Be extremely careful not to cut any of the wires. This allows you to access the fuse holder.

  4. Open the Fuse Housing: Pinch the base and the top of the compartment to slightly lift and open the hinged casing.

  5. Remove the Old Fuse: Pinch the bottom of the fuse holder housing and then pinch the 5-amp fuse (it's a small orange blade-style fuse) with your fingers. Wiggle it gently to pull it out of the holder. It may be stiff.

  6. Insert the New Fuse: Take the new 5-amp fuse. The orientation (which way it faces) does not matter. Center the new fuse in the housing and push it in with your thumb until it is sitting securely.

  7. Resecure Fuse Housing: Close the housing so the fuse is no longer visible. The housing and wire should now be zip tied snuggly against the rotation motor as it was previously. 
    1. IMPORTANT: It is crucial not to skip this step as it ensures there are no loose wires to get caught in moving parts.

  8. Test the Motor: Before reinstalling the shroud, plug the machine in and test the rotation motor to ensure the new fuse has resolved the issue and the motor is working correctly.

    1. To test the Rotation Motor function from the home screen of the application select More > Support > Troubleshooting > Diagnostics > Machine Commands. On this page there are a number of rotation commands. Select the Rotate to Left or Right Baseline option and let the command complete. 
      1. If there is no movement at this point the Rotation Motor may need to be replaced. Please start a support ticket here or reach back out to your Support+ Representative!
  9. Reassemble: Replace the left shroud  of the machine.

 

If you encounter any issues with the replacement process we’d love to assist you further! If you are already working with a representative please reply to them indicating the step you are getting stuck on. If you are not, please start a support ticket here or you can call the Support+ Team at 612-412-4410!